BENY Smart 22kW Tethered Type 2

฿52,000.00

คุณสมบัติของผลิตภัณฑ์

  • โมบายแอปพลิเคชั่น มีทั้ง IOS และ Android ตั้งเวลา สต่าร์ท หยุด การชาร์จได้
  • Build-in with overvoltage and under-voltage protection, over-current protection, over temperature protection, imperfect earth detection, CP abnormal signal protection and type A + DC 6mA
  • Operating temperature range: -25 ℃ ~ +55 ℃
  • With temperature sensor build-in important areas for fire protection
  • With leakage test function, ensure the normal operation of leakage protection
  • The charger has a function of automatic reset after troubleshooting. That means when a charger stop working when an anomaly is detected, the charger will periodically self-check whether the anomaly is eliminated. The charger will start to work automatically after ensure the anomaly has been eliminated
  • Without OCPP
รหัสสินค้า: BCP-AT2S-L หมวดหมู่: , , , ป้ายกำกับ:
ดูตะกร้าสินค้า

รายละเอียดเพิ่มเติม

BENY Smart EV Charger – 32A, 22kW (3 phases), Tethered Type 2

  • รับประกันผลิตภัณฑ์  5 ปี
  • Easy for cable storage.
  • The ramp-down stop current charging mode protects the EV batteries.
  • The EV charger can be wall-mounted or pile mounted. There are three wiring ways for the EV charger, bottom entry wiring, Top entry wiring and rear entry wiring. You will need to install the wiring box to make top entry wiring.
  • RFID card or auto-start charging for option.
  • Rated charging current can be set according to different home load conditions.
  • With lightning protection ensure personal safety.
  • Standard: EN IEC 61851-1 IEC 61851-21-2
  • Certificate: CE/UKCA

ข้อมูลเพิ่มเติม

Make

BENY

kW

22kW

Charging Gun

Charging Socket

Electrical        

Charging capacity 22kW

Charge mode Mode 3 (IEC 61851-1)

Output power   3-phase 400V, 32 A, 60 Hz

Connector options Fixed cable type 2 plug

Fixed cable length 6m (18 ft)

Cable entry Rear or bottom

Protection and certification    

Build-in RCD   TYPE A + DC6mA leakage sensor built-in

With cable IP65

Housing fire ratings V0

Operating temperature   -25 – +55c

Compliance IEC61851-1, IEC61851-21-2, IEC61000-4, CE EMC EU/2014, CE Low Voltage EU/2014/35

Certificate CE / UKCA

Mechanical     

Housing Polycarbonate

Dimension W169 x H380 x D151 / 201 mm

Mounting Wall or Pole

 

 

Connectivity  

Authorization    Auto-start standard / RFID card option

Status indication LED ring

WLAN communication Wi-Fi / Bluetooth 4.2

Connectivity   

Authorization    Auto-start standard / RFID card option

Status indication LED ring

WLAN communication Wi-Fi / Bluetooth 4.2

Smart APP

  • The EV charger can be controlled by smart APP via WIFI or Bluetooth connection:
  • One to one binding EV charger by reset the password, prevent the EV charger being stolen
  • View charging data and status
  • Set up various charging configurations ,charging current etc.
  • Scheduled charging
  • Firmware update

Safety Information                                                                                       

  • Easy for cable storage.
  • The ramp-down stop current charging mode protects the EV batteries.
  • The EV charger can be wall-mounted or pile mounted. There are three wiring ways for the EV charger, bottom entry wiring, Top entry wiring and rear entry wiring. You will need to install the wiring box to make top entry wiring.
  • RFID card or auto-start charging for option.
  • Rated charging current can be set according to different home load conditions.
  • With lightning protection ensure personal safety.