BENY-Smart-Black-front
BENY-Smart-Black-L
BENY-Smart-Black-R
BENY-OPTION-SOLAR-1P
BENY-APP-SQ
BENY-Smart-Black-ATTRI
88

BENY Smart 7.4kW Tethered Type 2

ChargeCheck:EV
MaxiCharger 7.4kW, Tethered Type2

฿43,000.00

Product Features

  • Mobile Smart Application IOS/Android and Dynamic Load Balancing Box (included)
  • Build-in with overvoltage and under-voltage protection, over-current protection, over
    temperature protection, imperfect earth detection, CP abnormal signal protection and
    type A + DC 6mA
  • Operating temperature range: -25 ℃ ~ +55 ℃
  • With temperature sensor build-in important areas for fire protection
  • With leakage test function, ensure the normal operation of leakage protection
  • The charger has a function of automatic reset after troubleshooting. That means when a charger stop working when an anomaly is detected, the charger will periodically self check whether the anomaly is eliminated. The charger will start to work automatically after ensure the anomaly has been eliminated
  • Without OCPP
SKU: A2N-L Categories: , ,
Inquire Us

Description

 

BENY Smart EV Charger With Dynamic Load Balancing – 32A, 7.4kW, Tethered Type 2

  • Product Warranty 5 Years
  • Easy for cable storage.
  • The ramp-down stop current charging mode protects the EV batteries.
  • The EV charger can be wall-mounted or pile mounted.There are three wiring ways for the EV charger, bottom entry wiring,Top entry wiring and rear entry wiring.You will need to install the wiring box to make top entry wiring.
  • RFID card or auto-start charging for option.Rated charging current can be set according to different home load conditions.With lightning protection ensure personal safety.
  • Standard: EN IEC 61851-1 IEC 61851-21-2
  • Certificate: CE/UKCA
  • Z-BOX APP

  • Additional options include a DLB Solar box and a complete set of current sensors. Able to work with solar cell system

 

                                                          DLB Solar Working Mode Description

 

Additional information

Make

Beny
kW

7.2kW
Charging Gun

Charging Socket

Electrical

Charging capacity 1.3kW – 7.4kW

Charge mode Mode 3 (IEC 61851-1)

Output power    1-phase, 32 A

Connector options  Fixed cable type 2 plug

Fixed cable length  6m (18 ft)

Cable entry Rear or bottom

Protection and certification    

Build-in RCD   TYPE A + DC6mA leakage sensor built-in

With cable        IP65

Housing fire ratings V0

Operating temperature   -25 – +55c

Compliance      IEC61851-1, IEC61851-21-2, IEC61000-4, CE EMC EU/2014, CE Low Voltage EU/2014/35

Certificate CE / UKCA

Mechanical

Housing  Polycarbonate

Dimension   W169 x H380 x D151 / 201 mm

Mounting   Wall or Pole

Connectivity   

Authorization    Auto-start standard / RFID card option

Status indication            LED ring

WLAN communication Wi-Fi / Bluetooth 4.2 (NBTC approved)

Dynamic Load Balancing

DLB (Dynamic Load Balancing) is available in the BCP series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.

Set the Max current value of the main line on the DLB box. The charger will read this current value and automatically adjust the charging current (6A-32A) according to the idle load quota, so that the total household current will not be overloaded due to charging. This function can effectively use the power supply without providing additional power for the charging or home line update.

Smart APP

  • The EV charger can be controlled by smart APP via WIFI or Bluetooth connection
  • One to one binding EV charger by reset the password, prevent the EV charger being stolen
  • View charging data and status
  • Set up various charging configurations, charging current , DLB mode etc.
  • Scheduled charging
  • Firmware update

Safety Information                                                                                       

  • Easy for cable storage.
  • The ramp-down stop current charging mode protects the EV batteries.
  • The EV charger can be wall-mounted or pile mounted. There are three wiring ways for the EV charger, bottom entry wiring, Top entry wiring and rear entry wiring. You will need to install the wiring box to make top entry wiring.
  • RFID card or auto-start charging for option.
  • Rated charging current can be set according to different home load conditions.
  • With lightning protection ensure personal safety.

Use and Installation Manual

DLB Manual (option)

Z-box App